Presenting the completely new developed I/O system SLIO®, VIPA once again sets new standards in the automation industry.
By means of the modular and extremely compact SLIO the realization of almost every automated solution will from now on be simpler and especially more economical.
SLIO can be combined and applied with each of the established VIPA systems 100V, 200V, 300S, 500S.
It´s one of the most effective and modern decentralized I/O systems available on the market. It combines high functionality with a clever mechanic concept in an extremely compact design.
Features
Compact and Space-Saving Design
- Conceptual separation of electronic and installation layer
- Space-saving, thin design
- Innovative staircase-shaped wiring layer
- Simple "Two components set-up"
Clever Labeling and Diagnostic Concept
- Clear allocation and readability of channel states
- Simple, time-saving installation and maintenance by means of the connector pin assignment provided on the module
- Clear, definite labeling of channels
- Reference designator label remains on the exchange of a module
Installation and Maintainability
- "Permanent Wiring" enables the exchanging without the disconnection of the wiring
- Intelligent slide and plug mechanism for a simple handling
- Electronic is protected against reverse polarity
- Encoding of the electronic modules prevents from incorrect plugging
High performance
- Quick backplane bus concept of 48MBit/s
- Very short response time when processing signals of up to 20µs
Clamps modules
|
Article
|
Description
|
|
001-0AA00
|
CM 001 - Bus-Terminal
anthracite
|
|
|
001-0AA10
|
CM 001 - Bus-Terminal
light gray, for power module
|
|
System SLIO - Power modules
Structure and Function
In the system SLIO the power supply is provided via power modules.
Both the bus interface as well as the electronics of the connected peripheral modules are supplied with power via the power module (PM) integrated in interface module (IM). The DC 24 V load power supply for the connected peripheral modules is provided via a further connection in the PM.
With the help of color-contrasted power modules within the system further potential areas for the DC 24 V load power supply can be defined.
The two-component design allows for the easiest of service by separating the electronics from the terminal module.
Characteristics
Power supply of the sensor/actuator-level
Nominal input voltage DC 24 V
Output current max. 10 A
Isolation from potential groups
Front integrated status LEDs
Mounting security by reverse polarity and overvoltage protection
24 months warranty
|
Order no.
|
Name/Description
|
|
007-1AB00
|
PM 007 - Power module
DC 24V, 10A, single supply
|
|
|
007-1AB10
|
PM 007 - Power module
DC 24V, 2nd DC 24V +5V/2A, double supply (available 3rd quarter 2010)
Interface:
DC 24V, 2nd DC 24V +5V/2A, incl. 001-0AA10 terminal modules
|
|
System SLIO - Signal modules digital
Structure and Function
Signal modules (SM) to connect sensors and actuators are the interfaces of the system to the process. Digital Signal modules acquire the binary control signals to and from the process level.
A variety of different digital signal modules provides exactly the I/O modules, which are required for each task. The digital modules differ in the number of channels, voltage and current ranges, isolation, and diagnostic and alarm capability.
Each signal module consists of a terminal and an electronics module.
The Terminal Module (TM) contains the receptacle for the electronic module (EM), the backplane connectors and contacts for the distribution of the load power supply electronics, the modular connection to DC 24 V load power supply and the staircase-shaped terminal block for wiring.
Furthermore the terminal module processes a locking system for fixing to a profile rail. The SLIO system can also be constructed "block by block" outside the cabinet and later assembled as a complete system in the control cabinet.
The functionality of the signal module is defined via the electronics module that is connected by a secure sliding mechanism to the terminal module.
During service the defective electronic module can be replaced without detaching the wiring.
Characteristics
- Electrically isolated digital inputs and outputs to the backplane bus
- 2, 4 or 8 channel
- Various modules, suitable for switches and proximity switches as well as for measuring transducers
- Direct mapping and readability of the channel conditions via status LEDs
- Safe and time-saving installation by the terminal assignment mounted on the module
- When changing the module equipment identification (BMK) is retained on the TM
- Individual single-channel lettering on insertion strip
- 24 month warranty
| Order no. |
Name/Description |
| 021-1BB00 |
SM 021 - Digital input
DI 2xDC 24V
|
|
| 021-1BB10 |
SM 021 - Digital input
DI 2xDC 24V, parameterizable 2µs...4ms (available 3rd quarter 2010)
|
|
| 021-1BB50 |
SM 021 - Digital input
DI 2xDC 24V, NPN
|
|
| 021-1BD00 |
SM 021 - Digital input
DI 4xDC 24V
|
|
| 021-1BD10 |
SM 021 - Digital input
DI 4xDC 24V, parameterizable 2µs...4ms (available 3rd quarter 2010)
|
|
| 021-1BD40 |
SM 021 - Digital input
DI 4xDC 24V, triple
|
|
| 021-1BD50 |
SM 021 - Digital input
DI 4xDC 24V, NPN
|
|
| 021-1BF00 |
SM 021 - Digital input
DI 8xDC 24V
|
|
| 021-1BF10 |
SM 021 - Digital input
DI 8xDC 24V, parameterizable 2µs...4ms
|
|
| 021-1BF50 |
SM 021 - Digital input
DI 8xDC 24V, NPN
|
|
| 022-1BB00 |
SM 022 - Digital output
DO 2xDC 24V, 0.5A
|
|
| 022-1BB20 |
SM 022 - Digital output
DO 2xDC 24V, 2A
|
|
| 022-1BB50 |
SM 022 - Digital output
DO 2xDC 24V, 0.5A, NPN
|
|
| 022-1BB90 |
SM 022 - Digital output
SM 022, DO2xDC24V 0.5A PWM
|
|
| 022-1BD00 |
SM 022 - Digital output
DO 4xDC 24V, 0.5A
|
|
| 022-1BD20 |
SM 022 - Digital output
DO 4xDC 24V, 2A
|
|
| 022-1BD50 |
SM 022 - Digital output
DO 4xDC 24V, 0.5A, NPN
|
|
| 022-1BF00 |
SM 022 - Digital output
DO 8xDC 24V, 0.5A
|
|
| 022-1BF50 |
SM 022 - Digital output
DO 8xDC 24V, 0.5A, NPN
|
|
| 022-1HB10 |
SM 022 - Digital output
DO 2xDC 30V/AC 230V, 3A, relay, floating per channel
|
System SLIO - Signal modules analog
Structure and Function
Signal modules (SM) to connect sensors and actuators are the interfaces of the system to the process. Analog signal modules acquire the analog control signals (e.g. measurement data) to and out of the process level. Depending on the application and type the control signals are acquired from the process level and converted into interpretable signals for controlling. Analog output modules convert the internal control signals into signals suitable for the process level.
A variety of different analog signal modules accurately provide the inputs and outputs that are required for each task. The analog modules differ in the number of channels, voltage and current ranges, isolation, and diagnostic and alarm capability.
Each signal module consists of a terminal and an electronics module.
The Terminal Module (TM) contains the retainer for the electronic module (EM), the backplane connectors and contacts for the distribution of the load power supply electronics, the modular connection to DC 24 V load power supply and the staircase-shaped terminal block for the wiring.
Furthermore the terminal module processes a locking system for fixing to a profile rail. The SLIO system can also be constructed "block by block" outside the cabinet and later assembled as a complete system in the control cabinet.
The functionality of the signal module is defined via the electronics module that is connected by a secure sliding mechanism to the terminal module.
During service the defective electronic module can be replaced without detaching the wiring.
Characteristics
- 2, 4 or 8 channel
- 12 bit or 16 bit resolution
- Functions of the inputs / outputs programmable
- Most various assemblies, suitable for measuring transducers (current/voltage, resistance or temperature sensors)
- Direct mapping and readability of the channel conditions via status LEDs
- Safe and time-saving installation by the terminal assignment mounted on the module
When changing the module equipment identification (BMK) is retained on the TM
- Individual single-channel lettering on insertion strip
- 24 month warranty
System SLIO - Function modules
Structure and Function
Function modules (FM) are intelligent modules that perform technological tasks such as position determination, counting and positioning, and other complex functions in the automation independently. They are used when there are high demands on accuracy and dynamic in the starting of automation tasks.
Different functional modules, for example Counter modules, SSI modules provide exactly the functions that are required for the respective tasks.
Each functional module consists of a terminal and an electronics module.
The Terminal Module (TM) contains the retainer for the electronic module (EM), the backplane connectors and contacts for the distribution of the load power supply electronics, the modular connection to DC 24 V load power supply and the staircase-shaped terminal block for the wiring.
Furthermore the terminal module processes a locking system for fixing to a profile rail. The SLIO system can also be constructed "block by block" outside the cabinet and later assembled as a complete system in the control cabinet.
The functionality of the signal module is defined via the electronics module that is connected by a secure sliding mechanism to the terminal module.
During service the defective electronic module can be replaced without detaching the wiring.
Characteristics
- Supports fast counter systems up to 1 MHz
- Counting direction invertible
- Integrated digital outputs
- For direct connection of incremental encoders
- Electrically isolated to the backplane bus
- Direct mapping and readability of the channel conditions via status LEDs
- Safe and time-saving installation by the terminal assignment mounted on the module
- When changing the module equipment identification (BMK) is retained on the TM
- Individual single-channel lettering on insertion strip
- 24 month warranty
|
Order no.
|
Name/Description
|
|
050-1BA00
|
FM 050 - Counter module␍␍␍
Counter 1x32Bit (AB), DC 24V, up to 400kHz, DO 1xDC 24V, 0.5A
|
|
|
050-1BA10
|
FM 050 - Counter module
Counter 1x32Bit (AB), DC 5V, up to 2MHz
|
|
|
050-1BB00
|
FM 050 - Counter module
Counter 2x32Bit (AB), DC 24V, up to 400kHz
|
|
|
050-1BB30
|
FM 050 - Counter module
Counter 2x32Bit (AB), DC 24V, up to 400kHz, ECO
|
|
|
050-1BS00
|
FM 050S - SSI module
1xSSI, RS422, 8...32Bit, 125kHz…2MHz, diagnosis, alarmfunction, µs-timestamp
|
|
System SLIO - Interface modules
Structure and Function
Interface modules (IM) form the interface between process level and parent bus system. All control signals are transmitted through the internal backplane bus to the electronics module (EM).
In the case of the interface module the bus interface and power module (PM) are integrated in a single casing. Both the bus interface and the electronics of the connected peripheral modules are supplied with power via the integrated power module.
Up to 64 I/O modules can be operated on the interface module.
Characteristics
- Support for various fieldbus systems
- Functional DIP switches for address setting for the PROFIBUS-DP and CANopen with transparent cover
- MAC address on the front in plain text
- Electrical isolation between fieldbus and input/output field
- Integrated DC 24 V power module to the electronic and load voltage supply of the peripheral modules
- Easy to maintain, replaceable power module
- Up to 64 signal and function modules per interface module
- 24 month warranty
|
Order no.
|
Name/Description
|
|
053-1CA00
|
IM 053CAN - CANopen slave
DC 24V, 1Mbit/s, address 1...126, up to 64 modules
|
|
|
053-1DN00
|
IM 053DN - DeviceNet slave
DC 24V, 500kbit/s, DeviceNet, up to 64 modules
|
|
|
053-1DP00
|
IM 053DP - Profibus-DP slave
DC 24V, 12Mbit/s, address 1...125, DP-V0, DP-V1, ␍configuration via GSD file from VIPA, up to 64 modules
|
|
|
053-1EC00
|
IM 053EC - EtherCAT slave
DC 24V, Ethernet RJ45, 100MBit, address 1...65535, EtherCAT, up to 64 modules
|
|
|
053-1MT00
|
IM 053MT - Modbus/TCP slave
DC 24V, Ethernet RJ45, 10/100Mbit/s, Modbus-TCP, up to 64 modules
|
|
|
053-1PN00
|
IM 053PN - PROFINET-IO slave
DC 24V, Ethernet RJ45, 100MBit, PROFINET-IO, up to 64 modules
|
|
